Medidor de flujo electromagnético de agua de mar en línea
- información
- Descripción del producto
- vídeo
- descargar
Electromagnetic flow meters are flowmeters that measure flow according to Faraday's law of electromagnetic induction. Electromagnetic flowmeters have the advantage of minimal pressure loss and a large range of measurable flow rates. The ratio of the maximum flow rate to the minimum flow rate is generally more than 20:1. The applicable industrial tube diameter is wide, up to 3 meters. The output signal and the measured flow rate are linear, and the accuracy is high. The conductivity can be measured ≥5μs/cm. Acid, alkali, salt solution, water, sewage, corrosive liquids, and fluid flow of mud, pulp, pulp, etc. However, it cannot measure the flow of gas, steam, and pure water.
CONVERTOR
Zero point stability,
low powerconsumption and high precisionLCD display,
Cumulative flow,lnstantaneous flow, Forward flow,Reverse flow, etc.
Units: L/h, U/m, L/s, m/h, m/m, m3/s, etc.Default Language: English.
BODY
Anticorrosive paint strict process..
Very shiny surface by polishing workmanship.
Various of flange standard,such as DIN,JIS,ANSI,ASME,BS,etc.
Lining and electrodes are selected regarding flow medium
Power Supply | 110-240Vac (Optional: 24 Vdc) |
Power Consumption | 10W |
Accuracy | 0.5% accuracy of rate from 0.3-10 m/s |
Repeatability | 0.2% |
Minimum Fluid Conductivity | 5.0 micromhos/cm |
Flow Direction | Unidirectional or bidirectional, 2 separate totalizers (programmable) |
Analog Output | 4-20mA, 750ohms Max Load |
Output Frequency | Scaled Pulse output, (open collector) Max 5Khz |
Noise Damping | Programmable |
Pulse Width | Programmable up to 500ms |
Zero-point Stability | Automatic correction |
Ambient Temperature | -20 to 60 C |
Electrode Materials | SS316L; Optional: Titanium; Hastelloy Alloy C; Tantalum |
Liner Material | PTFE, FEP, Hard Rubber |
Fluid Temperature | PTFE: 120C Standard (Customized: 180C) Rubber: 60C |
Pressure Limits | 1.0 Mpa; Optional 1.6; 2.5; 4.0 Mpa |
Coil Power | Pulsed DC |
Pipe Spool Material | SS316 |
Meter Housing Material | Carbon Steel welded or SS304 (Sanitary Connection) |
Flange | Carbon Steel - Standard (ISO 7005-1) ANSI, DIN and JIS Flange Connections Optional Stainless Steel Grounding Rings |
Order sheet
Calibration line
Magnetic flow meter applications
Inline Sea Water Electromagnetic Flow Meter
Los medidores de flujo electromagnéticos de la serie WFD se aplican ampliamente en química, termoelectricidad, minería y metalurgia, industria del carbón, industria alimentaria, tratamiento de aguas residuales y otras industrias. Nuestro medidor de flujo electromagnético tiene dos tipos: medidor de flujo electromagnético de tipo integrado y medidor de flujo electromagnético de tipo dividido.
